AKON holders for dies DIN 223 / EN 22568 AKON Werkzeuge GmbH
Holders for dies (DIN 223 / EN 22568)
To be used on a lathe
AKON die holders enable problem-free and exact threading on a lathe. Place the die in the holder and get started.
Easy to use
The holder is merely placed onto the lathe mandrel located in the tailstock. Size 1 holders are manually positioned onto the mandrel. Our larger holders are secured against torsion with parallel keys.
Different holders can be exchanged rapidly on the same mandrel.
Thread cutting through straight alignment
The holder is guided precisely on the lathe mandrel and therefore threads are cut perfectly and straight. No more poor finish or defective threads.
A lathe mandrel is to be ordered together with the die holder.
|Part No.||Size||For die OD and height (mm)||Dimensions (mm)||Thread to be cut|
|d1||d2||h||ISO metric coarse thread size - DIN 13||ISO metric fine thread size - DIN 13||Max. thread length (mm)|
|101605||1||16x5||12||16||5||M1 - M2.6||M2 x 0.25|
M2.6 x 0.35
|102007||1||20 x 7/5||12||20||7||M3 - M6||M3 x 0.35|
M6 x 0.75
|304518||3||45 x 18/14||25||45||18||M16 - M20||M16 x 1|
M20 x 2
|305522||3||55 x 22/16||25||55||22||M22 - M24||M22 x 1|
M26 x 1.5
|306525||3||65 x 25/18||25||65||25||M27 - M36||M27 x 1.5|
M36 x 2
Scope of supply: Die holders incl. a hex key.
The threads to be machined represent only a small selection. Please refer to your die catalog for additional dies which can be used to cut Whitworth threads, Whitworth pipe threads, etc.