AKON die and tap holder set size 2
For external and internal threads
- Extenal threads M3 - M14
- Internal threads M3 - M16
- For dies DIN 223 / EN 22568
- 20x7/5 mm, 25x9 mm, 30x11 mm, 38x14/10 mm
- Shank diameter d1 = 20 mm
| Part No. | For optional lathe mandrel |
|---|---|
| 200202 | MT2 with lug and depth scaling |
| 200203 | MT3 with lug and depth scaling |
| 200204 | MT4 with lug and depth scaling |
| 200200 | without a lathe mandrel |
Consisting of
| Part No. | Description | for die OD and height (mm) | ISO metric coarse thread size to be cut - DIN 13 |
|---|---|---|---|
| 021000 | Basic holder | ||
| Square chuck | |||
| 020316 | Attachment for tapping | 2.7 - 9.0 mm | M3 - M16 |
| 022007 022509 023011 023814 | Attachment for threading | 20x7/5 25x9 30x11 38x14/10 | M3 - M6 M7 - M9 M10 - M11 M12 - M14 |
| 012025 022030 | Hex key | ||
| 022316 | T-handle wrench | ||
Lathe mandrel optional.
Maximum length of male thread 70 - 80 mm.
For external threads
- External threads M3 - M14
- For dies DIN DIN 223 / EN 22568
- 20x7/5 mm, 25x9 mm, 30x11 mm, 38x14/10 mm
- Shank diameter d1 = 20 mm
| Part No. | For optional lathe mandrel |
|---|---|
| 200102 | MT2 with lug and depth scaling |
| 200103 | MT3 with lug and depth scaling |
| 200104 | MT4 with lug and depth scaling |
| 200100 | without a lathe mandrel |
Consisting of
| Part No. | Description | for die OD and height (mm) | ISO metric coarse thread size to be cut - DIN 13 |
|---|---|---|---|
| 021000 | Basic holder | ||
| 022007 022509 023011 023814 | Attachment for threading | 20x7/5 25x9 30x11 38x14/10 | M3 - M6 M7 - M9 M10 - M11 M12 - M14 |
| 012025 022030 | Hex key |
