Die and tap holder sets AKON Werkzeuge GmbH
AKON die and tap holder set size 1
For external and internal threads
- External threads M1 - M6
- Internal threads M1 - M6
- For dies DIN 223 / EN 22568
- 16x5 mm, 20x7/5 mm
- Shank diameter d1 = 12 mm
| Part No. | For optional lathe mandrel |
|---|---|
| 100201 | MT1 with lug and depth scaling |
| 100202 | MT2 with lug and depth scaling |
| 100203 | MT3 with lug and depth scaling |
| 100200 | without a lathe mandrel |
Consisting of
| Part No. | Description | for die OD and height (mm) | ISO metric coarse thread size to be cut - DIN 13 |
|---|---|---|---|
| 101605 102007 | Die holder | 16x5 20x7/5 | M1 - M2.6 M3 - M6 |
| Square chuck | |||
| 100106 | Tap holder | 2.1 - 4.9 mm | M1 - M6 |
| 011015 012025 | Hex key | ||
| 012106 | T-handle wrench | ||
Lathe mandrel optional.
Maximum length of male thread 60 - 70 mm.
For external threads
- External threads M1 - M6
- For dies DIN 223 / EN 22568
- 16x5 mm, 20x7/5 mm
- Shank diameter d1 = 12 mm
| Part No. | For optional lathe mandrel |
|---|---|
| 100101 | MT1 with lug and depth scaling |
| 100102 | MT2 with lug and depth scaling |
| 100103 | MT3 with lug and depth scaling |
| 100100 | without a lathe mandrel |
Consisting of
| Part No. | Description | for die OD and height (mm) | ISO metric coarse thread size to be cut - DIN 13 |
|---|---|---|---|
| 101605 102007 | Die holder | 16x5 20x7/5 | M1 - M2.6 M3 - M6 |
| 011015 012025 | Hex key |
AKON die and tap holder set size 3
For external and internal threads
- External threads M16 - M24
- Internal threads M4 - M24
- For dies DIN 223 / EN 22568
- 45x18/14 mm, 55x22/16 mm
- Shank diameter d1 = 25 mm
| Part No. | For optional lathe mandrel |
|---|---|
| 300203 | MT3 with lug and depth scaling |
| 300204 | MT4 with lug and depth scaling |
| 300200 | without a lathe mandrel |
Consisting of
| Part No. | Description | for die OD and height (mm) | ISO metric coarse thread size to be cut - DIN 13 |
|---|---|---|---|
| 304518 305522 | Die holder | 45x18/14 55x22/16 | M16 - M20 M22 - M24 |
| Square chuck | |||
| 300424 | Tap holder | 3.4 - 14.5 mm | M4 - M24 |
| 033040 033050 | Hex key | ||
| 032424 | T-handle wrench | ||
Lathe mandrel optional.
Maximum length of male thread 70 - 80 mm.
For external threads
- External threads M16 - M24
- For dies DIN 223 / EN 22568
- 45x18/14 mm, 55x22/16 mm
- Shank diameter d1 = 25 mm
| Part No. | For optional lathe mandrel |
|---|---|
| 300103 | MT3 with lug and depth scaling |
| 300104 | MT4 with lug and depth scaling |
| 300100 | without a lathe mandrel |
Consisting of
| Part No. | Description | for die OD and height (mm) | ISO metric coarse thread size to be cut - DIN 13 |
|---|---|---|---|
| 304518 305522 | Die holder | 45x18/14 55x22/16 | M16 - M20 M22 - M24 |
| 033040 033050 | Hex key |
