Sin sistema de cambio rápido Portaterrajas de Roscar
Para uso en tornos convencionales
To be used on a lathe
AKON die holders enable problem-free and exact threading on a lathe. Place the die in the holder and get started.
Advantages
Easy to use
The holder is merely placed onto the lathe mandrel located in the tailstock. Size 1 holders are manually positioned onto the mandrel. Our larger holders are secured against torsion with parallel keys.
Fast exchange
Different holders can be exchanged rapidly on the same mandrel.
Thread cutting through Might alignment
The holder is guided precisely on the lathe mandrel and therefore threads are cut perfectly and straight. No more poor
finish or defective threads.
Se debe pedir un mandrill con el soporte básico
| N.°articulo | Tamaño | Diámetro y altura de la terraja de roscar | Dimensiones (mm) | Rosca a mecanizar | ||||
|---|---|---|---|---|---|---|---|---|
| d1 | d2 | h | Rosca metr. estándar ISO DIN 13 |
Rosca metr. fina ISO DIN 13 |
Longitud de rosca mecanizable | |||
| 101605 | 1 | 16x5 | 12 | 16 | 5 | M1 - M2,6 |
M2 x 0,25 M2,6 x 0,35 |
60 |
| 102007 | 1 | 20 x 7/5 | 12 | 20 | 7 | M3 - M6 |
M3 x 0,35 M6 x 0,75 |
70 |
| 304518 | 3 | 45x18/14 | 25 | 45 | 18 | M16 - M20 |
M16 x 1 M20 x 2 |
80 |
| 305522 | 3 | 55 x 22/16 | 25 | 55 | 22 | M22 - M24 |
M22 x 1 M26 x 1,5 |
70 |
| 306525 | 3 | 65 x 25/18 | 25 | 65 | 25 | M27 - M36 |
M27 x 1,5 M36 x 2 |
70 |
Volumen de suministro: Las arandelas no están incluidas.
Las roscar mecanizables representan sólo una pequena selección. Consulte en su catálogo de terrajas para roscar las terrajas adicionales utilizables para mecanizar roscas Whitworth, roscas Whitworth para tubos etc.