AKON holders for dies DIN 223 / EN 22568 AKON Werkzeuge GmbH
Holders for dies (DIN 223 / EN 22568)
For use on lathes, CNC machines or drill presses
Our new AKON die holders with quick change system enable problem-free and exact threading. Place the threading attachment and get started.
Advantages
Fast exchange
The new AKON die holder consist of a basic holder and several threading attachments, which can be exchanged easily and quickly.
Easy to use
The basic holder is merely placed onto the lathe mandrel fitted in the tailstock. The holders are secured against torsion with parallel keys.
Thread cutting through straight alignment on a lathe
The holder is guided precisely on the lathe mandrel and therefore threads are cut perfectly and straight. No more poor finish or defective threads.
For CNC machines and drill presses
The threading attachments together with the matching holders can also be used on CNC machines or drill presses.
A lathe mandrel is to be ordered together with the die holder.
| Part No. | Size | For die OD and height (mm) | Dimensions (mm) | Thread to be cut | ||||
|---|---|---|---|---|---|---|---|---|
| d1 | d2 | h | ISO metric coarse thread size - DIN 13 | ISO metric fine thread size - DIN 13 | Max. thread length (mm) | |||
| 021000 | 2 | Basic holder for lathes | 20 | |||||
| 022007 | 2 | Attachment for 20 x 7 / 5 | 20 | 20 | 7 | M3 - M6 |
M3 x 0.35 M6 x 0.75 |
70 |
| 022509 | 2 | Attachment for 25 x 9 | 20 | 25 | 8 | M7 - M9 |
M7 x 0.75 M9 x 1 |
80 |
| 023011 | 2 | Attachment for 30 x 11 | 20 | 30 | 11 | M10 - M11 |
M10 x 0.75 M11 x 1 |
80 |
| 023814 | 2 | Attachment for 38 x 14 / 10 | 20 | 38 | 14 | M12 - M14 |
M12 x 1 M14 x 1.5 |
80 |
Scope of supply: Die holders incl. a hex key.
The threads to be machined represent only a small selection. Please refer to your die catalog for additional dies which can be used to cut Whitworth threads, Whitworth pipe threads, etc.
For use on CNC machines
The new basic holder for CNC-machines with its cylindrical shaft addresses the great demand for using our holder set in addition on CNC machines.
The AKON die attachments are also compatible with holders for CNC-machines. The thread sizes that can be cut include M3 - M14 or N5x40 - 9/16@x12 UNC.
| Part No. | Size |
shank diameter d1 (mm) |
Thread size to be cut* | Remarks |
|---|---|---|---|---|
| 200071 | 2 | 16 | M3 - M14 | for CNC machines |
* The AKON threading attachments are to be ordered together with the basic holder for CNC machines.
For use in drill presses
Simply insert the basic holder for drill presses with Morse taper shank MT2 into the drilling spindle, pull back the blue aluminium sleeve and fit the threading attachment. The aluminium sleeve will drop down automatically and is then secured in place by a ball. These AKON basic holders can be used on all drill presses with clockwise or counter-clockwise rotation.
| Part No. | Size |
Dimensions MT |
Thread size to be cut* | Remarks |
|---|---|---|---|---|
| 200072 | 2 | 2 | M3 - M14 | for drill presses |
* The AKON threading attachments are to be ordered together with the basic holder for drill presses.